Questions & Answers

Wont program. No flashing blue light

0 votes
I can't get my CHRT5 to work. I connected the 2 yellow ignition wires, and the green/red to purple for the MUX. Apparently this is all I need to do. Others on a Ram forum did this and got it to work. I'm thinking it might have to do with the programming with the module. The guy I bought it off of updated it for me, and turned on the 3x lock function.  When I hold down the button and plug the data cable, I leave it on the blue light. I then plug everything in. Turn the key to on, and the blue light turns off. Then my dash lights flicker, and I get a check gauges light. Please help.
asked Dec 5, 2016 in Dodge by Scott Roberts2 (180 points)

1 Answer

0 votes
Can anyone help me?
answered Dec 8, 2016 by Scott Roberts2 (180 points)

My suggestion is as follows: 

- Put the harness back to factory specs.

- Perform a master reset on the evo: http://wirecolor.com/en/qa/50193/faq-how-do-i-reset-my-evo-all?show=50193#q50193

- Re-flash the module to the latest firmware.

-Re-enable the options for stand alone.

-Try to reprogram the module in the vehicle.

If it still does not work at this point I would suggest calling us when you are in the vehicle to troubleshoot the issue with you. Toll Free: 1-877-336-7797

 

...