Questions & Answers

2013 Fusion Evo All stand Alone start on single lock only and won t start on three lock. Randomly.

0 votes
I ve installed the Evo All that was previously ready for a 2014 Dodge . I did reprogram to 2013 Fusion with regular key.

Is there an update for Stand Alone Ford Fusion program ?

Should I have use a basiv Evo All instead of one ready for a Dodge ?
posté Mai 8, 2015 dans la catégorie Ford par Marc Voyer (920 points)

1 Réponse

0 votes
Can you send us the service number of the Evo-All module so we can check the firmware and options selected.

 

Also, did you do a master reset before you flashed the unit for the Ford Fusion?
répondu Mai 8, 2015 par J M (64,060 points)
I don't know what would be a Master reset.   Tell me what to do for master reset . Then I will reprogram with the firmware you tell me to .

Unfortunately I m not with the car now and will be able to see it only in weekends.

 

Can I send you what I have without being online with you ?
And which firmware should I reprogram for my 2013 Fusion ?
Hey Darren, the link you provided doesn't work.

 

Master Reset:

1.Unplug everything from Evo All

2. Push and hold down programming button.

3 Plug in black datalink connector.

4. Release programming button when RED led lights up.

5. Push and hold programming button again until all 3 leds flash in sequence (Blue...Red...Yellow....Blue/Red...)

6. Release button and unplug datalink connector.

7. Master Reset done!
Latest Ford firmware is 71.27. When you plug the unit in the flash-link, select the vehicle, then go in EVO-ALL Updates, it will show you the firmwares available for Ford.
I did a master reset .  reprogram to 71.27 then I saved option C1  and D1

I did reprogram evo all to my car . it s not working Evo does not keep otions that I selected after master reset.

 

Besides that , since I had it done once , will I need to reactivate the dealer remote  option at the Ford dealer  ?

 

Thanks , Marc.
Service # is :  001A06 394156
I made more work on my side . I did delete then re-install flash link manager .

I plug it in , then saw D1 option was not activated. I did click D1 and " Save Option "

Disconect everything , let it sit , then replug everything . Now all wanted options are showing . Will wait next weekend to retry on the car .

Feedback coming then. Thanks for help so far .

Main reason i have seen this happen is because the Flash link is not in the right connection mode.. Before pluggin in the EVO to the flash-link, make sure it says Connection Mode : Bypass on the bottom right corner. If it says Connection Mode : Remote Starter, click on the Toggle button.

...