Can EVO-ALL be used as an alarm for a 2001 Tacoma and if so what guide.

Question

I am wanting to use the EVO-ALL in a 2001 Toyota Tacoma as an alarm with an external RF Antenna to control the door locks and an Avital 4113 remote starter I plan to integrate with it.  The vehicle does not have an alarm or remote natively with it.  The Avital remote start will be hard wired to the EVO-ALL since I am using an RF kit.  The question is what guide and what firmware should I use for the unit to make this is possible.  Thank you.

Answer 1

No, the internal alarm can not be controled by your remote if you are using wire to wire installation

Here is the guide for EVO Alarm http://fortin.ca/download/16221/16221.pdf

Comments

Just to clarify:

2001 Tacoma - No alarm, No keyfob, Power Locks

Option 1

   RF Kit with Evo-All setup as alarm with hardwire to the remote start and vehicle.  Control Evo-All alarm, remote start, and door locks (through Evo-All) via RF kit attached to Evo All.

Option 2

  Evo-All setup as alarm hardwired to vehicle and data link to remote start.  Control Evo-All alarm, remote start, door locks (through Evo-All) via remote start fob.

Will both options work.  Is one preferred.

Thanks.

Jim