EVO-ONE with T-harness in Prius C - no response to OEM key fob

Question

Installed the EVO-ONE with THAR-TOY2 in a 2014 Toyota Prius C with regular key (G key). Programming went as described in the guide with all of the appropriate LEDs flashing. The module does not respond to the OEM key fob. No lights come on when the buttons are pressed and no remote start. There is a constantly flashing red light on the back of the unit. The module was supposed to be pre-programmed and the Flashlink Updater was supposed to be optional. Not sure if I have a bad connection or if it wasn't programmed correctly for the vehicle.

Answer 1

Your vehicle is not 3x lock compatible.

http://fortin.ca/en/vehicles/toyota/priusc/2015-hybrid_h-key/

And the correct options are not enabled to monitor the oem remote.

Comments

Thank you for the response.  I was incorrectly told that I did not need the Flashlink Updater when I ordered the kit, so I have one coming now and will do the proper programming. The installation manual is for a Camry and Prius C both with 'G' key. The 2014 Camry 'G' key is listed as being compatible--are you sure the Prius C 'G' key is not as well?