Questions & Answers

2000 tundra AT unfinished install

0 votes
I removed dealer installed car alarm and I want to use remote start function on EVO One and RF642W remote. The Unit gets power and I release program button on the red led. Turning key to the on position extinguishes the led. RF642W keys will not sync with unit. I press and hold the valet switch and never get a chirp or a parking lights blink.
posté Juil 24, 2018 dans la catégorie Toyota par Mostafa Fath El-Den (130 points)

1 Réponse

0 votes
2000 tundra does not have an immobilizer. You should not need to program the bypass portion of the module.

 

In regards to programming remotes that is listed in this guide:

http://cdn02.fortin.ca/download/33061/evo-one_qg_rf641w_l_33061.pdf
répondu Juil 25, 2018 par derek g (339,870 points)
Following guide 33061, I turn the ignition switch to the on position then press and hold the valet button. There is no response (horn or lights). I have checked my wiring many times.
commenté Juil 28, 2018 par Mostafa Fath El-Den (130 points)
Are you able to go in and out of valet mode?
commenté Juil 30, 2018 par derek g (339,870 points)
The blue light on the RF antenna never comes on so I assume not. The remote start program led does blink each time I press the valet switch.
commenté Juil 31, 2018 par Mostafa Fath El-Den (130 points)
I believe we are already speaking through email Mostafa. Will update this thread when issue is resolved.
commenté Aout 1, 2018 par derek g (339,870 points)

Questions associées:

...